Florida Sheet Metal Contractor w. Business Finance

We offer custom training options for the Florida Sheet Metal Contractor w. Business Finance training built around your schedule. Find out now what options we have available.

Explore Custom Training Today

This license allows unlimited work in the sheet metal trade to manufacture, fabricate, assemble, handle, erect, install, dismantle, condition, adjust, insulate, alter, repair, service, or design ferrous or nonferrous metal work of US No. 10 gauge or its equivalent or light gauge. A sheet metal contractor may also work with other materials including, but no limited to, fiberglass.

This product is currently out of stock and unavailable.

SKU: c742 Category: Tag:

Required Books 

The references listed below are permitted to be taken into the examination. These references may be tabbed (with permanent index tabs) and highlighted. They are available for purchase from our online contractor’s bookstore or by calling our office at 1-800-992-1910.

*There is an additional item that is necessary during the Sheet Metal exam*

All Candidates: Bring an Architect's Scale (including 1/4" and 1/8" ) for the Trade Knowledge Exam.

 

Add All Required Books to Cart ($1,976.95)

Additional Services

  • Please note that the Florida Business and Finance exam as well as the Florida Sheet Metal exam is required to be passed to obtain your contractor’s license.
  • Minimum amounts required for General Liability insurance for Sheet Metal contractors are $100,000 for bodily injury and $25,000 for property damage. All contractors are required to carry Worker’s Compensation Insurance.
  • All contractors must be at least 18 years of age and be of good moral character.

    Beginning November 1, 2007, all applicants for initial licensure or changed of status will be required to have a criminal background check performed by the Florida Department of Law Enforcement and Federal Bureau of Investigation. YOU ARE RESPONSIBLE FOR ENSURING THAT YOUR FINGERPRINTS HAVE BEEN SCANNED BY THE DEPARTMENT’S VENDOR, PROMISSOR/PEARSON VUE, PRIOR TO SUBMITTING YOUR APPLICATION.

  • If an applicant has a FICO credit score lower than 660, he/she will be requested to provide a licensing bond or letter of credit to obtain licensure. Please review the Department’s Financial Responsibility and Stability website for additional information on the Board’s requirements. The amount of the licensing bond or letter of credit is based on the type of license requested: $20,000 for Division I contractors and $10,000 for Division II contractors. 

  • Experience Required:

  • 4 years of experience in the trade with at least 1 year having been supervisory work OR
     
  • A 4 year degree from an accredited college and 1 year proven experience applicable to the category for which you are applying OR
     
  • 1 year as a foreman and not less than 3 years of credits from any accredited college level courses OR
     
  • 1 year as a workman, 1 year proven experience as a foreman, and 2 years of credits from any accredited college level courses OR
     
  • 2 years of experience as a workman, 1 year of experience as a foreman, and 1 year of credits from any accredited college level courses OR
     
  • Have an active Certified Florida contractor’s license (This option only applies to Certified Building, Residential, Air Conditioning, and Swimming Pool contractors as provided in Section 489.111 (2)(c)4-6, Florida Statutes).

      • *You can substitute up to 3 years of college credit for experience*

This license allows unlimited work in the sheet metal trade to manufacture, fabricate, assemble, handle, erect, install, dismantle, condition, adjust, insulate, alter, repair, service, or design ferrous or nonferrous metal work of US No. 10 gauge or its equivalent or light gauge. A sheet metal contractor may also work with other materials including, but no limited to, fiberglass.

To apply, contact State of Florida Department of Business and Professional Regulation 1-850-487-1395.

If applying for initial licensure from May 1st of an Even numbered year through August 31st of an Odd numbered year the fee is $249.

If applying for initial licensure from September 1st of an Odd numbered year through April 30th of an Even numbered year the fee is $149.

You must pay a fee of $56.25 to Promissor/Pearson VUE for the processing of your electronic fingerprints.

Candidates will receive an unofficial grade report on the day they pass the exam. However, test scores and license approval do not become official until ratified by the Contractors Licensing Board at their next meeting. Licenses are typically received within 14 days of the exam.

Important Contacts

Commercial, residential & public works construction is regulated at the local/municipal level AND at the state level. A statewide-certified license is granted by the construction or electrical licensing boards for most categories of licensure.

Applications for contractor licenses (other than electrical) are filed with:

Department of Business & Professional Regulation
The Construction Industry Licensing Board
1940 North Monroe Street
Tallahassee, FL 32399
(850)487-1395
http://www.myfloridalicense.com/DBPR/construction-
Information on electrical licensing may be obtained from:

Electrical Contractors Licensing Board
Department of Business & Professional Regulation
1940 North Monroe Street
Tallahassee, Fl 32399
(850)487-1395

To schedule the Florida Electrical Business exam (CBT) you must contact Promissor/Pearson Vue at 1-888-204-6230.

http://www.myfloridalicense.com/DBPR/electrical-co
To register for the exam:

Professional Testing Inc.
PO Box 691226
Orlando, FL 32869-1226
phone: 407-264-0562
fax: 407-264-2977

To make a reservation to meet the fingerprinting requirement:

Pearson VUE
Customer Care: (888) 204-6230
www.pearsonvue.com
proftesting.com
Florida General Construction - County License
To Register for the exam:

Prometric
Canton Crossing
1501 South Clinton Street
Baltimore, MD 21224
USA
1-866-PROMETRIC (776-6387)
1-443-455-8000
www.prometric.com

Florida does not have a reciprocal agreement with any other states for this license.

As of this time Florida requires 14 hours of board approved continuing education each biennium prior to the renewal period for both certified and registered contractors. At least 1 hour must deal with workplace safety, 1 hour must be on the subject of worker’s compensation, 1 hour must cover the subject of business practices, 1hour must cover the subject of laws and rules, 1 hour must cover wind mitigation methodologies, and 1 hour must cover the Florida Building Code advanced modules.

    Effective November 15, 2008 examination fees are being restructured . When applying to schedule for the examination with Professional Testing Inc. (PTI) , the following fee structure will apply:

    All parts of the examination:
    Pay $135.00 examination development fee payable to PTI, $80.00 examination administration fee payable to DBPR, but mailed to PTI. An $80.00 examination administration fee payable to Pearson Vue (formerly Promissor), the CBT (Computer Based Testing) contracted vendor, is due at the time of scheduling.

  • A score of at least 70% is required to pass the exams.
  • The exam is 2 days, open book, multiple-choice, and timed.
  • You must complete all portions of the examination within 4 years of the first attempt. After four years, all previous test scores become invalid and you will be required to take all parts of the examination again.

  • There are 2 parts to the exam, the business finance part and the trade knowledge part. The time limit for each exam portion is 4 hours and 45 minutes.

  • The Florida Sheet Metal exam consists of 80 equally weighted questions and is held on the morning of the 2nd day.

  • The Florida Business and Finance exam has a morning session of 60 equally weighted questions and an afternoon session of 60 equally weighted questions.
  • Applicants must submit an application and exam fee to become registered to take the exam. The testing company must receive completed applications and appropriate fees no later than 30 days prior to the next scheduled exam date.

    Topics covered on the trade knowledge exam portion are pre-installation and site work, industrial duct fabrication, architectural sheet metal, fabricating other sheet metal structures, installation of sheet metal systems, and safety and equipment

  • To schedule your exam you must contact Professional Testing, Inc (PTI) at 1-407-264-0562.

American Contractors offers a seminar to prepare for the Florida Sheet Metal Contractor and Business and Finance Exam which is also required to obtain this license. Please contact us for additional information, 1-800-992-1910.

Related products