Required Books
The references listed below can to be taken into the examination. These references may be tabbed (with a permanent index tab) and highlighted. They are available for purchase from our online contractor’s bookstore or by calling our office at 1-800-955-7277.
Beginning November 5, 2020, 2 additional books have been added to the booklist. They are:
Developing Your Stormwater Pollution Prevention Plan- A Guide for Construction Sites, EPA Document #833R06004 (this is a free pdf)
The item listed below is a pdf which must be purchased from the publisher. The link is below:
ANSI/EIMA 99-A-2017: Standard for Exterior Insulation and Finish Systems (EIFS) and EIFS with Drainage, 2017, ANSI/EIMA,
https://mycontractorslicense.com/ansi-eima-99-a-2017-standard-for-exterior-insulation-and-finish-systems-eifs-and-eifs-with-drainage/
Add All Required Books to Cart ($2,392.40)
-
2018 International Building Code, softcover, Tabbed and Highlighted
$183.00
Add to cart
-
ACI 318-14 Building Code Requirements for Structural Concrete
$239.00
Add to cart
-
ANSI A117.1-2017 Accessible and Useable Buildings and Facilities
$59.00
Add to cart
-
Basic Business & Project Management, 14th Edition -NASCLA
$94.75
Add to cart
-
Carpentry & Building Construction, 6th Ed, 2016
$125.00
Add to cart
-
Construction Jobsite Management, 4th Ed
$229.95
Add to cart
-
Contractors Guide to Quality Concrete Construction 4th Ed.
$97.00
Add to cart
-
Developing Your Stormwater Pollution Plan- A Guide for Construction Sites, .pdf
$19.00
Add to cart
-
Erectors Manual: Standards and Guidelines for Erection of Precast Concrete
$40.00
Add to cart
-
Georgia NASCLA Contractors Guide to Business Law & Project Management GA State Licensing Board for Residential and General Contractors, 3rd Edition
$94.75
Add to cart
-
Green Building Fundamentals, Practical Guide to Understanding and Applying Fundamental Sustainable Construction Practices and the Leed® System, Second Edition
$119.00
Add to cart
-
Guide to Good Practice for Handling, Installing, Restraining & Bracing of Wood Trusses
$24.50
Add to cart
-
Gypsum Construction Handbook, 7th
$57.50
Add to cart
-
Handling and Erection of Steel Joists and Girders
$50.00
Add to cart
-
Manual of Construction with Steel Deck
$53.00
Add to cart
-
Mechanical and Electrical Systems for Construction Managers, 4th Edition
$155.00
Add to cart
-
Modern Masonry, 2022
$135.00
Add to cart
-
OSHA 29. CFR 1926 for Contractors Highlighted & Tabbed
$46.00
Add to cart
-
Permanent Tabs for the Georgia Business & Project Management book, Builders Edition
$12.95
Add to cart
-
Permanent Tabs for the NASCLA Accredited Exam Books (Commercial)
$55.00
Add to cart
-
Pipe & Excavation Contracting
$49.00
Add to cart
-
Placing Reinforcing Bars 10th, 2019
$99.00
Add to cart
-
Principles and Practices of Commercial Construction 10th ed.
$225.00
Add to cart
-
Roofing Construction & Estimating, Revised
$50.00
Add to cart
-
Training & Certification of Field Personnel For Unbonded Post-Tension
$80.00
Add to cart
Additional Services
A General Contractor is unlimited as to the type of work they may do. It also does not limit them as to what type of contracts they are eligible to bid on. It provides for private, commercial, institutional, industrial, public, and other buildings and structures. This does NOT include HVAC, Plumbing, Electrical, Low Voltage, or Utility Contracting. There are no limitations on project size.
To apply, contact the state of Georgia at (478) 207-2440.
A nonrefundable fee of $200.00 must be submitted with application.
Reference Letter Information:
Instructions for Architect/Engineer Reference Letter -(As Part of the Work Experience requirement on Page 5 of the License Application)
The applicant shall provide at least one letter of recommendation from a registered or licensed architect or engineer that includes, as a minimum, the following information:
- The Full Name of the Applicant
- The name, approximate size , date and dollar amount of the commercial project worked on together during the qualifying time period
- A statement that the applicant demonstrated reasonable skills and knowledge of general contracting on the project.
- A statement that the architect or engineer recommends the state grant a license to conduct General Contracting to the applicant upon completion of the exams and other requirements.
- Any further explanation or comments regarding applicant’s abilities, skills, knowledge, and integrity. The letter shall include the architect or engineer of records current address, contact information and registration or license number issued by the accredited licensing body.
Important Contacts
NASCLA Accredited license is accepted in the following states: Alabama, Arkansas, Georgia, Louisiana, Mississippi, North Carolina, Oregon, South Carolina, Tennessee, Utah, Virginia, West Virginia & the Virgin Islands.
West Virginia will accept the NASCLA exam scores for the West Virginia General Contractor, provided the NASCLA exam was passed after 11/1/2013.
Nevada is also accepting the NASCLA exam scores if the exam was passed after 12/1/2013. This is for the same classification. As of 8/1/2017, Arizona began accepting this examination in lieu trade examinations for the B-1 and B-2 General Commercial Contracting Classifications. As of 11/21/2017 Arizona also began administering the NASCLA exam.
As of 3/1/2019, Florida is accepting the NASCLA exam. Scores from the NASCLA exam are now acceptable for the Residential, Building, or General Contractor classifications. Applicants using the NASCLA exam will still be required to pass the Florida Business and Finance exams and meet all other application requirements.
Currently, there is no continuing education for this license.
- The fee for the exam is $106.
- The NASCLA Accredited exam for has 115 questions and a time limit of 300 minutes.
- A 70% is required to pass.
-
Exam Content
1. Planning and Estimating (21)
2. Financial and Project Management (21)
3. Safety (19)
4. Site Construction (15)
5. Concrete (8)
6. Masonry (3)
7. Metals (5)
8. Wood Foundations and Framing (5)
9. Thermal Moisture Protection (4)
10. Doors, Windows, and Glazing (5)
11. Finishes (7)
12. Specialty Equipment and Conveyance Systems (2)
To schedule your exam, you must first obtain pre-approval by submitting experience and education information to the testing company, PSI. Once approved, schedule exams by contacting PSI at (800) 733-9267.
- All eligibility's are valid for 1-year from the date that the application is received by the Board. If you do not pass the examination within the 1-year period, you must reapply with the Board.
- You must pass both the Business and Law and the Trade examinations within the 1-year period. If you fail one examination, and pass the other examination, you will only need to retake the failed examination.
- If you fail the examination twice within the 1-year eligibility period your application becomes void. You will need to reapply to the Board, for both examinations, regardless if you had passed one during the 1-year period. You may reapply after the original 1 year eligibility period expires.
American Contractors holds a two-day General Contractor Seminar with Business Law that guarantees that you will pass the NASCLA Accredited Contractor license exam and the Georgia Business Law exam. American Contractors has been holding Seminars to help contractors pass their exam for over 22 years. Sign up today for the Georgia Exam Preparation Seminar!